Tilemaster-Rapid-Setaflex-Grey---White

Tilemaster Rapid Setaflex

Advantages

One of the key advantages of Tilemaster Rapid Setaflex adhesive is its rapid-setting properties. This means that it can be used to fix tiles to walls and floors quickly, which is particularly useful for time-sensitive projects. Rapid-setting adhesives like Tilemaster Rapid Setaflex are also beneficial in situations where the temperature is low, or where moisture is present, as they will still set quickly regardless of these conditions.

Another benefit of Tilemaster Rapid Setaflex adhesive is its versatility. It can be used on a wide range of substrates, including concrete, screed, plasterboard, and existing tiles. This makes it a versatile solution for a variety of tiling projects, whether you are working on a new build or a renovation. It is available in Grey or White.

Tilemaster Rapid Setaflex adhesive is also highly flexible, which makes it ideal for use in areas that are subject to movement or vibration, such as underfloor heating systems. Its flexibility also makes it less likely to crack or fail over time, which is important for ensuring the longevity of your tiled surfaces.

Guide

If you are planning to use Tilemaster Rapid Setaflex adhesive for your tiling project, here is a step-by-step guide on how to use it:

Preparation: Before you start using Tilemaster Rapid Setaflex adhesive, you need to ensure that the surface is clean, dry, and free from any dust, grease, or loose material. If the surface is porous, you may need to prime it first.

Mixing: Mix the Tilemaster Rapid Setaflex adhesive according to the manufacturer’s instructions. Typically, you will need to mix the adhesive with water until you get a smooth, lump-free conistency.

Application: Apply the adhesive to the surface using a notched trowel, making sure to spread it evenly. The size of the trowel you use will depend on the size of the tiles you are using. It is important to work quickly as the adhesive sets rapidly.

Tile placement: Once the adhesive has been applied, place the tiles onto the adhesive, using spacers to ensure that they are evenly spaced. Press down firmly on each tile to ensure good contact with the adhesive.

Grouting: Wait until the adhesive has set before removing the spacers and grouting the tiles. Depending on the conditions, the adhesive can set in as little as 3 hours.

Cleaning: Once the grout has dried, clean the tiles with a damp cloth to remove any grout residue. Its always worth using a stain protector on grout once it has dried.

Tips

Tilemaster Rapid Setaflex adhesive is suitable for use on a wide range of tiles, including porcelain, ceramic, and natural stone.

It is important to mix the adhesive thoroughly to ensure a smooth, lump-free consistency.

Avoid applying the adhesive in areas where the temperature is below 5°C or above 30°C.

Do not apply the adhesive to areas that are exposed to direct sunlight, as this can cause the adhesive to dry too quickly.

Always wear gloves and protective clothing when handling the adhesive.

By following these steps, you should be able to use Tilemaster Rapid Setaflex adhesive to achieve a professional finish on your tiling project.

Shopping Basket